manualshive.com logo in svg

Simrad Maris ECDIS900, Operator'S Manual

The Simrad Maris ECDIS900 is a cutting-edge navigation system used by maritime professionals. Ensure seamless installation and optimum performance with our comprehensive Installation Manual, available for free download at manualshive.com. Gain full access to the manual and unlock the potential of this exceptional product for your navigation needs.

Share
Download
background image

Ú

Note: 

the function 

Rename the waypoints

 is applicable only to waypoints with

numbers which were set by default: WP_001, WP_002 etc. All manually renamed
waypoints are ignored by this function. If you want to name waypoints, do it when the
route has been approved.

Delete a waypoint

1.

Select a waypoint in the list by clicking on its name

2.

Click the 

Delete waypoint

 button or press the key 

Delete

 key from your keyboard.

Ú

Note: 

A route is defined by at least two waypoints. If the route contains less than two

waypoints, the route is deleted and the route plan window closed.

Ú

Note: 

The selected waypoint will be deleted immediately, Use the 

Undo

 button to

recover a deleted waypoint.

Move a waypoint in the list

1.

Right click on the waypoint’s name and select the menu Move after.

2.

Then select the destination waypoint and the waypoint will be moved after the selected
waypoint.

Waypoint ETA information

The panel WP ETA displays the ETA value for any waypoint selected by the user. The required
waypoint is selected by clicking the small arrows on the RHS of the panel.

Select between Ship Speed and Planned speed by clicking the two buttons located under
the arrows.

Ú

Note: 

If the panel is not displayed, the user can make it visible by clicking the button

Option and checking on the box WP ETA in the console configuration panel.
ETA for an active waypoint is always calculated using the ship speed.

Fixed ETA function

The console 

Fixed ETA

 displays the selected waypoint number, the ETA required by user,

and the speed to be maintained to reach the selected waypoint on time.

Waypoints

| ECDIS900 Operator Manual

123

Summary of Contents for Maris ECDIS900















































































































































































































Reviews:

No comments

Related manuals for Maris ECDIS900

Garmin nuvi 800 series Quick Start Manual preview
nuvi 800 series
Brand: Garmin Pages: 12
Magellan 980915 - TrafficKit - NavTraffic Receiver User Manual preview
980915 - TrafficKit - NavTraffic Receiver
Brand: Magellan Pages: 86
SBG Navsight Apogee IMU Hardware Manual preview
Navsight Apogee IMU
Brand: SBG Pages: 74
NavTool NAVTOOL6.0-LG2-NBT Installation Manual preview
NAVTOOL6.0-LG2-NBT
Brand: NavTool Pages: 28
Clatronic AR 735 CD/MP3 Instruction Manual preview
AR 735 CD/MP3
Brand: Clatronic Pages: 78
Roadstar CDR-485US/BK Instruction Manual preview
CDR-485US/BK
Brand: Roadstar Pages: 26
Skoda CAR RADIO BOLERO Owner'S Manual preview
CAR RADIO BOLERO
Brand: Skoda Pages: 54
Boss Audio Systems HP-10 User Manual preview
HP-10
Brand: Boss Audio Systems Pages: 9
JVCKENWOOD Kenwood DDX7016BT Instruction Manual preview
Kenwood DDX7016BT
Brand: JVCKENWOOD Pages: 78
Xonax XM-VRSUN740BT User Manual preview
XM-VRSUN740BT
Brand: Xonax Pages: 24
Pioneer AVIC-Z1 Installation Manual preview
AVIC-Z1
Brand: Pioneer Pages: 62
Pioneer AVIC-X940BT Operation Manual preview
AVIC-X940BT
Brand: Pioneer Pages: 240
Eclipse CD5030 Installation Manual preview
CD5030
Brand: Eclipse Pages: 8
StageMotion DT2LRJ12 User And Installation Manual preview
DT2LRJ12
Brand: StageMotion Pages: 17
Bose Lifestyle Music Center Operating Manual preview
Lifestyle Music Center
Brand: Bose Pages: 101
Toyota 08545-00805 Installation Instructions Manual preview
08545-00805
Brand: Toyota Pages: 31
Toyota Aygo X-NAV Owner'S Manual preview
Aygo X-NAV
Brand: Toyota Pages: 32
Hyundai Mobis AT240C2AN Quick Manual preview
AT240C2AN
Brand: Hyundai Mobis Pages: 41

Brands by name

Popular brands

Load more brands