Simrad Maris ECDIS900 Operator'S Manual Download

Page: 124 / 206

The Fixed ETA function can be used for any waypoint after the active waypoint. There are
two ways to select the waypoint and enter the ETA.

The first: click right button on the waypoint, select Properties, check on the box Fixed ETA,
and enter the ETA value.

The second: in the route plan click on

ETA of the selected waypoint

and enter the ETA

value.

Waypoint arrival warnings and alarms

Note:

These alerts are triggered if the TCS option is ON. See

"Configuring alerts"

on page 41

for details.

When a waypoint is crossed, the following alerts are triggered:

Time (default)

Alert

Alert type

Description

3 minutes before the
WOP (Wheel Over
Point)

Early course change

Warning

Does not require
acknowledgement

30 seconds before
the WOP

Course change

Warning

Ship starts turning
onto the new course,
does not require
acknowledgement

WOP is reached

Course change

Alarm

Require
acknowledgement

30 seconds after the
WOP is passed

Back up navigator

Alarm

In case the Course
change alarm was
not acknowledged

You can define other time both for the Early course change and for the Course change. See

"Route options"

on page 111 for details.

After the turning is ended, the passed waypoint is deactivated while the next waypoint
becomes active.

Note:

When the

Course change

alarm is not acknowledged, the system considers the

ship is out of control.

Then the alarm is triggered to make sound in other rooms of the ship to inform navigators
out watch that something is wrong on the bridge.

When the last waypoint is reached, the

End of track alert

is triggered.

124

Waypoints

| ECDIS900 Operator Manual

Summary of Contents for Maris ECDIS900















































































































































































































Search results

Summary of Contents for Maris ECDIS900

Reviews:

Related manuals for Maris ECDIS900

Brands by name

Popular brands

Simrad Maris ECDIS900, Operator'S Manual

Search results

Summary of Contents for Maris ECDIS900

Reviews:

Related manuals for Maris ECDIS900

Brands by name

Popular brands