Sedecal SPL-HF 2.0, Service Manual

Page: 59 / 222

Portable X-ray Units
Service Manual
SM-1076R2 49
ERROR CODE : E06
DESCRIPTION
: “ Preparation ” order input signal is active during the Start-up sequence.
“Unrecoverable”, the system remains lock.
POSIBLE CAUSES
The microprocessor has detected “ Preparation ” during the Start-up sequence.
ACTIONS
1. Make sure that the “ Preparation ” order is inactive during the Start-up by first
checking the Handswitch control and Console Overlay.
2. Make sure that the “ Preparation ” order is inactive during the Start-up by checking
the signal in:
G
connector J6.3, J8.3, J12.2 and J13.3 on Portable Control Board
(
A3175--03 ).
G
connector J2.5 (Handswitch) and J1.7 (RS--232) of the Portable Unit.
G
overlay ribbon cables signal connected to J13.3 on Portable Control
Board (
A3175--03 ).
G
connector J4.5 on the Remote Console Connectors ( A3632--02 ) (only for
Portable Units with Trolley).
3. Verify the possible defective hardware related to these inputs.
4. Deactivate the input or replace the defective hardware.