Sedecal SPL-HF 2.0, Service Manual

Page: 79 / 222

Portable X-ray Units
Service Manual
SM-1076R2 69
ERROR CODE : E48
DESCRIPTION
: Bucky / Digital Panel interface error.
The user is trying to perform an exposure with a Bucky or a Digital Panel but this
interface is not available.
“Recoverable” with the “
Reset ” push-button.
POSIBLE CAUSES
The workstation configuration is wrong.
The unit has not installed the proper software for Bucky / Digital Panel interface.
ACTIONS
Configure the workstation without bucky/digital interface or ask for the proper software
which supports the bucky/digital interface.
1. If the error is due to a wrong configured Workstation, perform actions described
in error codes “E02” and “E03”. If a Bucky / Digital Panel is not interfaced to this
Workstation, configure it for “
Direct ” Workstation.
2. If the error is due to a wrong software version, contact to the manufacturer.
ERROR CODE : E50
DESCRIPTION
: Exposure has been aborted by the operator or defective exposure device. The user has
released the exposure device/s before the end of the exposure (Prep and/or Exp).
“Recoverable” with the “
Reset ” push-button.
POSIBLE CAUSES
The user has prematurely released the exposure device.
Defective exposure device (Handswitch, Control Panel, ...).
ACTIONS
1. Check the correct status of the exposure device (Handswitch, Control Panel, ...)
and their respective cable connections.
2. Verify the possible defective hardware related to these inputs and replace the
defective hardware, if needed.