Sedecal SPL-HF 2.0, Service Manual

Page: 108 / 222

Portable X-ray Units
Service Manual
SM-1076R2
98
12. Replace the HV Transformer. The HV Transformer assembly comprises
the HV Transformer with the X-ray Tube, the Expansion Membrane and
the two HV Transformer Supports.
HV Transformer with X-ray Tube
HV Transformer Supports
Expansion Membrane
13. Re-install the Collimator Adaptation Ring in the new HV Transformer.
14. Connect the J10 Ribbon cable, the wires connected to TR1--2, TR1--3,
TR1--1 (GND) and the three GND wires fixed to the HV Transformer
screws.
15. Re-install the Control the Control Driver Board ( A3189--04 ) and connect
the two Ribbon cables to J1 and J2 of the Filaments HF Board
(
A9500--01 ).
16. Mount the Resonant Inductance in HV Transformer fixing its wires with
a Tie Wrap.
17. Assemble the Central Support and the two Handle Axis Supports.
18. Assemble the Connectors Panel and the Upper and Lower Covers.