Sedecal SPL-HF 2.0, Service Manual

Page: 133 / 222

Portable X-ray Units
Service Manual
SM-1076R2 123
5.4.10 SNUBBER
1. Access inside the Unit by removing Upper and Lower Covers and
unscrewing the Protecting Plate (
refer to Section 5.4.4 ).
2. Replace the Snubber as described in Section 5.3.12 (steps 2. to 7.).
5.4.11 FILAMENTS HF BOARD
1. Access inside the Unit by removing Upper and Lower Covers and
unscrewing the Protecting Plate (
refer to Section 5.4.4 ).
2. Replace the Filaments HF Board as described in Section 5.3.13 (steps
2. to 4.).
5.4.12 CONTROL DRIVER BOARD
1. Access inside the Unit by removing Upper and Lower Covers and
unscrewing the Protecting Plate (
refer to Section 5.4.4 ).
2. Replace the Control Driver Board as described in Section 5.3.14 (steps
2. to 10.).
5.4.13 HV TRANSFORMER
1. Disassemble the X-ray Power Unit from the Arm ( refer to Section 5.4.1 )
following Method-2, so the “U” shaped support remains installed in the
Arm.
2. Remove the Collimator ( refer to Section 5.4.2 ).
3. Access inside the Unit by removing Upper and Lower Covers and
unscrewing the Protecting Plate (
refer to Section 5.4.4, steps 3. to 7. ).