Sedecal SPL-HF 2.0, Service Manual

Page: 21 / 222

Portable X-ray Units
Service Manual
SM-1076R2 11
2.2.5 MAXIMUM X-RAY TUBE POWER
The maximum X-Ray Tube Power (power curves) can be set at
70, 80, 90 or 100% of the maximum rate. This power limitation
increases the total life of the Tube.
1. Select Configuration menu C06.
2. Enter sub-menu 6.1. The kVp Display shows (C6.1) and the mAs Display
shows (Factory set 100).
3. To change the Percentage Rating, press “mAs Increase” or “mAs
Decrease” push-buttons (70, 80, 90 or 100). Value factory set at 100.
4. Press “Reset” push-button to save the value.
5. Press “Collimator Light” push-button to exit sub-menus. The kVp Display
shows (C06).
2.2.6 MISCELLANEOUS
1. Select configuration menu C07.
2. Enter sub-menu C7.1 for Speaker Sound Configuration. The kVp Display
shows (C7.1) and the mAs Display shows (factory set on).
3. Press “mAs Increase” or “mAs Decrease” to change Speaker Sound
Configuration. Press “Reset” push-button to save value.
4. Press “kVp Increase” to enter sub-menu C7.2 for Winter / Summer
Automatic Time Update. The kVp Display shows (C7.2) and mAs shows
(Factory set yes)
.
5. Press “mAs Increase” or “mAs Decrease” to change the Winter /
Summer Automatic Time Update . Press “Reset” push-button to save
value.
6. Press “kVp Increase” to enter sub-menu C7.3 for Collimator Light ON
with PREP. The kVp Display shows (C7.3) and mAs shows (Factory set
oFF)
.
7. Press “mAs Increase” or “mAs Decrease” to change the Collimator Light
ON with PREP . Press “Reset” push-button to save value.
8. Press “Collimator Light” push-button to exit sub-menus. The kVp Display
shows (C07).
Note
.