Rohde & Schwarz DIB-500 R4.1, Installation And Operation Manual

Page: 78 / 142

DIB-500 R4.1 Commissioning
78 Installation and Operation Manual 90DIB500IM02 – 5.2
Configuring the DIB-500 R4.1 Preparatory measures Section 5.7.2 on
page 102
Switching on the voltage
source Section 5.7.2.1
on page 103
Switching on the equipment
rack Section 5.7.2.2
on page 103
Connecting the service com-
puter Section 5.7.2.3
on page 104
Deleting the ARP buffer Section 5.7.3 on
page 106
Configuring and generating network configurations via the
NMC-515 ConfigurationManager Section 5.7.4 on
page 107
Creating the download repository Section 5.7.5 on
page 108
Adapting the IP address (with more than one TIB module) Section 5.7.6 on
page 108
Performing an initial download via NMC-522 DownloadMan-
ager Section 5.7.7 on
page 115
Setting a cavity coupler to the
TX frequency Setting the output power Section 5.8.2 on
page 116
Measuring and checking the carriers (impedance adjustment) Section 5.8.3 on
page 119
Function tests DIB-500 R4.1 Checking operating statuses Section 5.9.2 on
page 123
Checking operating statuses
(via the NMC-511 FaultMan-
ager) Section 5.9.2.1
on page 123
Checking operating statuses
(via the Service and Mainte-
nance Tool, SMT) Section 5.9.2.2
on page 124
Checking operating statuses
(via LEDs of the TIB) Section 5.9.2.3
on page 125
Checking operating statuses
(via LEDs of the voltage sup-
ply unit) – optional (only for
VAC voltage supply) Section 5.9.2.4
on page 126
Checking voice channels Section 5.9.3 on
page 127
Checking the voice channel
(two carriers) Section 5.9.3.1
on page 127
Checking the voice channel
(more than two carriers) Section 5.9.3.2
on page 129
Checking the installation site of the GPS antenna Section 5.9.4 on
page 130
Concluding tasks Section 5.9.5 on
page 131
Table 5.1 Overview of the tasks to be performed
Tasks/work steps Described in: