Rohde & Schwarz DIB-500 R4.1, Installation And Operation Manual

Page: 77 / 142

Installation and Operation Manual 90DIB500IM02 – 5.2 77
DIB-500 R4.1 Commissioning
5 Commissioning
The following chapter describes the procedure for connecting the electrical system
properly and for commissioning the product on site.
The tasks listed in the following table must be performed for commissioning the
DIB-500 R4.1.
Order of tasks to be performed
When you have completed a work step, always navigate to the next work step via the
overview table to ensure that the tasks are performed in the correct order.
Table 5.1 Overview of the tasks to be performed
Tasks/work steps Described in:
Removing the top cover of the equipment rack Section 4.4.1 on
page 63
Connection to the electrical
system Connection with the grounding system Section 5.1.2 on
page 79
Connecting the voltage supply Section 5.1.3 on
page 81
Connecting the VDC voltage
supply Section 5.1.3.1
on page 82
Connecting the VAC voltage
supply (optional) Section 5.1.3.2
on page 84
Connecting E1 Section 5.1.4 on
page 86
Connecting E1 connectors
(RJ-45) Section 5.1.4.1
on page 88
Connecting E1 (LSA+) Section 5.1.4.2
on page 89
Installing the GPS antenna Section 5.2 on
page 90
Connecting antennas (GPS and TETRA) Section 5.3 on
page 93
Connecting external alarm sensors Section 5.4 on
page 95
Connecting external alarms
(optional) Removing the top cover of the equipment rack Section 5.5.2 on
page 97
Connecting external alarms Section 5.5.3 on
page 98
Mounting the top cover of the mounting frame Section 5.5.4 on
page 101
Mounting the top cover of the equipment rack Section 5.6 on
page 101