Rohde & Schwarz DIB-500 R4.1, Installation And Operation Manual

Page: 23 / 142

Installation and Operation Manual 90DIB500IM02 – 5.2 25
DIB-500 R4.1 Product description
Components of the DIB-500 R4.1
3.2 Components of the DIB-500 R4.1
The network elements of the DIB-500 R4.1 consist of the following network/hardware
components:
| TETRA Indoor Base Transceiver (TIB)
| Antenna Coupling System (ACS)
| VAC voltage supply unit (optional) including AC voltage supply module(s)
| Connection panel
| Fan unit
The following chapters describe the components and interfaces as well as the wiring of
the variants and the scope of delivery of the DIB-500 R4.1.
Table 3.1 Legend: DIB-500 R4.1 constituents
No. Network component Quan-
tity Installed hardware component(s), with
software component(s) (if applicable)
1 -- 1 Voltage supply and alarming system
| Mounting frame (optional for VDC voltage
supply)
| System controller (optional for VDC volt-
age supply)
| Alarm input/output module (optional with
VDC voltage supply)
| VAC voltage supply unit (optional) includ-
ing AC voltage supply module(s)
2 -- 1 Connection panel with front cover including
On/Off switches
3 TIB (TETRA Indoor
Base Transceiver) 1 Multi Processor Server Unit (MSU)
| PowerPC
– Switching and Routing Server (SRS)
– Processing Unit Controller (PUC)
| GPS module
IntelPC
| TETRA Operation Server (TOS)
| Network Element Manager (NEM-523)
Further hardware components such as:
| Synthesizer
| Power supply
| Receiver/transmitter (carrier)
4a ACS (Antenna Coupling
System) 1 - 2 Antenna coupling according to the variant of
the, refer to section 3.2.2 on page 30:
| High Power
| Hybrid
| Cavity (Cavity combiner in a separate
equipment rack, refer to 4b)
4b 1 - 8 Cavity coupler (only for the Cavity variant)
5 -- 1 - 2 Fan unit comprising:
| Fan subrack (for each TIB module)
– Fan
– Air filter mat