Rohde & Schwarz DIB-500 R4.1, Installation And Operation Manual

Page: 57 / 142

Installation and Operation Manual 90DIB500IM02 – 5.2 59
DIB-500 R4.1 Installation
4 Installation
The following chapter describes the procedure for correctly installing the product on
site.
The tasks listed in the following table must be performed for setting up the
DIB-500 R4.1.
Order of tasks to be performed
When you have completed a work step, always navigate to the next work step via the
overview table to ensure that the tasks are performed in the correct order.
Table 4.1 Overview of the tasks to be performed
Tasks/Work steps Described in:
Installing equipment racks Section 4.3 on
page 61
Connecting equipment racks
(as of 5 carriers) Removing the top cover of the equipment rack Section 4.4.1 on
page 63
Mounting the LRU (optional, variants with redundancy pack-
age only – depending on the delivery status) Section 4.4.2 on
page 65
Installing the left top hat rail
end bracket Section 4.4.2.3
on page 66
Establishing the voltage sup-
ply of the LRU Section 4.4.2.4
on page 67
Inserting the LRU Section 4.4.2.5
on page 71
Installing the top hat rail
power supply unit Section 4.4.2.6
on page 72
Installing the right top hat rail
end bracket Section 4.4.2.7
on page 74
Connecting the equipment racks A and B Section 4.4.3 on
page 74