DIB-500 R4.1
Commissioning
Installing the GPS antenna
90
Installation and Operation Manual 90DIB500IM02 – 5.2
5.2 Installing the GPS antenna
The scope of delivery of the product/system comprises an antenna mounting kit includ-
ing the GPS antenna. A third-party GPS antenna may be used instead. In this case,
heed the documentation of the third-party devices to prevent adverse effects and mal-
functions of the product//system and other products connected to it.
The GPS antenna included in the scope of delivery is appropriate for the following
installation sites:
|
Installation on building roofs
|
Installation on building walls,
|
Installation on an antenna mast.
Figure 5.10 shows an example of installing the GPS antenna supplied.
Figure 5.10 Example: installation of the GP antenna supplied (roof, wall, mast installation)
Responsibility for the installation, commissioning and maintenance of the GPS
antenna
The operating company is responsible for the proper installation, commissioning and
maintenance of the GPS antenna unless this is an integral part of the contract con-
cluded with Rohde & Schwarz Professional Mobile Radio GmbH.
The operator is responsible for ensuring that:
|
the installation location of the GPS antenna is appropriate for installing an antenna,
e.g. the roof or wall of a building or an antenna mast.
|
an antenna mast, if used, including any required retaining elements are installed in
such a way that they are protected against outside influences, e.g. a storm.
|
equipment for overload protection and lightning protection of the GPS antenna has
been provided at the installation site. In this case, ensure that the amplifier inte-
grated in the GPS antenna is supplied with voltage via the antenna cable.
