DIB-500 R4.1
Commissioning
Configuring the DIB-500 R4.1
112
Installation and Operation Manual 90DIB500IM02 – 5.2
Carry out the following steps:
1. Start "PuTTY“ by double-clicking the executable file.
➥
The user interface of "PuTTY“ will be displayed:
Figure 5.26 "PuTTY“ user interface
2. Enter the corresponding IP address in the "Host Name (or IP address)“ field, refer
to Table 5.12.
3. Click
"Open".
➥
The SSH connection will be established.
➥
The following output is displayed:
login as:
4. Enter the following as the user name:
root
5. Press the ENTER key to confirm your input.
6. Enter the following as the password:
ACCESSNET
7. Press the ENTER key to confirm your input.
➥
The connection to the component has been set up.
