DIB-500 R4.1
Commissioning
Installing the GPS antenna
92
Installation and Operation Manual 90DIB500IM02 – 5.2
4. Tighten the corresponding fastening screws to install the GPS antenna at the
installation site. Use a size 4 Allen wrench for this purpose.
Figure 5.12 GPS antenna – installation at the installation site
If cables are routed over sharp edges or in bending radiuses too small for the
cables, the cables may be damaged.
➔
If cables are routed over sharp edges or in bending radiuses too small for the cables,
the cables may be damaged.
5. Connect the cable of the GPS antenna to the corresponding connector on the bot-
tom of the GPS antenna, refer to Figure 5.13.
Figure 5.13 Connecting the cable of the GPS antenna
6. Protect the GPS antenna cable against tensile stress by securing it to the holder of
the GPS antenna with cable ties.
