DIB-500 R4.1
Commissioning
Configuring the DIB-500 R4.1
106
Installation and Operation Manual 90DIB500IM02 – 5.2
Carry out the following steps:
➔
Connect the network cable to the service connector (refer to Figure 5.23) of the
network element and the Ethernet port of the service computer.
Figure 5.23 Service connector
✓
The service computer has been connected.
5.7.3
Deleting the ARP buffer
The assignments of IP addresses to hardware addresses of network adapters (MAC
address) are stored in the ARP (Address Resolution Protocol) buffer.
To ensure that the initial download is performed properly, the ARP buffer on the respec-
tive service computer must be deleted after each connection.
The procedure for deleting the ARP buffer is described in the following.
Proceed as follows to delete the ARP buffer:
Preparation:
✓
The service computer must be connected with the product/system.
Carry out the following steps:
1. Call the command prompt via the Windows Start menu, "Programs", "Accessories".
