DIB-500 R4.1
Notes on the Document
Qualification of personnel
12
Installation and Operation Manual 90DIB500IM02 – 5.2
1.4 Qualification of personnel
Specialists are persons, who:
|
are trained and experienced in the corresponding field.
|
are familiar with the applicable standards, regulations and provisions associated
with the corresponding task.
1.5 Figures and special notations used
Figures and symbols are used in the present document. They serve for presenting the
product and for emphasizing particular pieces of information.
1.5.1
Figures used
The figures used in this document show the product in a simplified form where neces-
sary for clarity (e.g. technical drawings). They are based on the standard variant of the
serial equipment or module.
1.5.2
Special notations
The special notations described in the following serve for the enhanced comprehensibil-
ity of information. They emphasize specific pieces of information, help you to recognize
this information fast and take corresponding measures.
1.5.2.1
Designation of components installed
In favour of an enhanced comprehensibility, the product names of the installed (net-
work/hardware) components will be abbreviated in the present document. The numeric
specification of the respective (network/hardware) component will also be omitted, e.g.
the addition -500.
For a unique designation of the (network/hardware) components installed in your net-
work element, please refer to the type label, on which every (network/hardware) compo-
nent inside the equipment rack is detailed.
1.5.2.2
Sequence of actions
Standard operation procedures guide you step by step through a sequence of actions
until you have reached the desired goal.
Example of a sequence of actions:
Goal of the actions
Preparation:
✓
List of the prerequisite(s) for an action
✓
...
