Rev. 5.00, 12/03, page 845 of 1088
V
CL
V
SS
External capacitor
to stabilize the
power supply
Do not connect the V
CC
power-supply to the V
CL
pin.
Doing so could permanently damage the LSI. (Connect
the V
CC
power-supply to the V
CC
pin, in the usual way.)
Use a multilayer ceramic capacitor (0.1
µ
F), and place
it near the pins.
0.1
µ
F
Figure 20.24 V
CL
Capacitor Connection Method
20.5
Usage Note
Although both the F-ZTAT and mask ROM versions fully meet the electrical specifications listed
in this manual, there may be differences in the actual values of the electrical characteristics,
operating margins, noise margins, and so forth, due to differences in the fabrication process, the
on-chip ROM, and the layout patterns.
If the F-ZTAT version is used to carry out system evaluation and testing, therefore, when
switching to the mask ROM version the same evaluation and testing procedures should also be
conducted on this version.
Summary of Contents for H8S/2318 series
