Renesas H8S/2318 series, Hardware Manual

Page: 563 / 1121

Rev. 5.00, 12/03, page 533 of 1088
φ
ADTRG
Internal trigger signal
ADST
A/D conversion
Figure 14-6 External Trigger Input Timing
14.5 Interrupts
The A/D converter generates an A/D conversion end interrupt (ADI) at the end of A/D conversion.
ADI interrupt requests can be enabled or disabled by means of the ADIE bit in ADCSR.
The DTC can be activated by an ADI interrupt. Having the converted data read by the DTC in
response to an ADI interrupt enables continuous conversion to be achieved without imposing a
load on software.
The A/D converter interrupt source is shown in table 14-6.
Table 14-6 A/D Converter Interrupt Source
Interrupt Source Description DTC Activation
ADI Interrupt due to end of conversion Possible