Renesas H8S/2318 series, Hardware Manual

Page: 179 / 1121

Rev. 5.00, 12/03, page 149 of 1088
Bit 7—Idle Cycle Insert 1 (ICIS1): Selects whether or not one idle cycle state is to be inserted
between bus cycles when successive external read cycles are performed in different areas.
Bit 7
ICIS1
Description
0 Idle cycle not inserted in case of successive external read cycles in different areas
1 Idle cycle inserted in case of successive external read cycles in different areas
(Initial value)
Bit 6—Idle Cycle Insert 0 (ICIS0): Selects whether or not one idle cycle state is to be inserted
between bus cycles when successive external read and external write cycles are performed .
Bit 6
ICIS0
Description
0 Idle cycle not inserted in case of successive external read and external write cycles
1 Idle cycle inserted in case of successive external read and external write cycles
(Initial value)
Bit 5—Burst ROM Enable (BRSTRM): Selects whether area 0 is used as a burst ROM interface
area.
Bit 5
BRSTRM
Description
0 Area 0 is basic bus interface area (Initial value)
1 Area 0 is burst ROM interface area
Bit 4—Burst Cycle Select 1 (BRSTS1): Selects the number of burst cycles for the burst ROM
interface.
Bit 4
BRSTS1
Description
0 Burst cycle comprises 1 state
1 Burst cycle comprises 2 states (Initial value)