Renesas H8S/2318 series, Hardware Manual

Page: 277 / 1121

Rev. 5.00, 12/03, page 247 of 1088
8.5 Port 4
8.5.1 Overview
Port 4 is an 8-bit input-only port. Port 4 pins also function as A/D converter analog input pins
(AN0 to AN7) and D/A converter analog output pins (DA0 and DA1). Port 4 pin functions are the
same in all operating modes. Figure 8-4 shows the port 4 pin configuration.
P47 (input) / AN7 (input) / DA1 (output)
P46 (input) / AN6 (input) / DA0 (output)
P45 (input) / AN5 (input)
P44 (input) / AN4 (input)
P43 (input) / AN3 (input)
P42 (input) / AN2 (input)
P41 (input) / AN1 (input)
P40 (input) / AN0 (input)
Port 4 pins
Port 4
Figure 8-4 Port 4 Pin Functions
8.5.2 Register Configuration
Table 8-8 shows the port 4 register configuration. Port 4 is an input-only port, and does not have a
data direction register or data register.
Table 8-8 Port 4 Register
Name Abbreviation R/W Initial Value Address
*
Port 4 register PORT4 R Undefined H'FF53
Note: * Lower 16 bits of the address.
Port 4 Register (PORT4): The pin states are always read when a port 4 read is performed.
Bit : 7 6 5 4 3 2 1 0
P47 P46 P45 P44 P43 P42 P41 P40
Initial value : —
*
—
*
—
*
—
*
—
*
—
*
—
*
—
*
R/W : R R R R R R R R
Note:
*
Determined by state of pins P47 to P40.