QMS 1060, User Manual

Page: 96 / 311

Interfaces
QMS 1060 Print System Reference 4-62
Min K Spool
Sets the minimum number of kilobytes of system memory allocated to
the serial interface.
Spool Timeout
Sets the number of seconds the interface waits for additional data
from the host before terminating a spooled print job.
Default ESP
Notes If you want to emulate an Adobe printer when using the
PostScript emulation, you must also set Mode to
Interactive.
Menu Administration/Communications/Serial/Min K Spool
Choices 00000-99999
Default 00015
Notes This value must be less than K Mem For Spool.
A 00000 value does not turn off the spooling buffer for
the serial interface. If the value is set to 00000, the
printer calculates the Min K Spool automatically at
initialization.
The printer is immediately restarted when a change is
made to this option. (For example, change the value to
35, press the Select key, and the menu changes to
LocalTalk. Press the Online/Offline key and the printer
automatically reboots.
Menu Administration/Communications/Serial/Spool Timeout
Choices 00000-99999
Default 00030
Notes If you change this setting, you must ensure that the new
setting does not conflict with the PS Wait Timeout and
Emul Timeout values. If this value expires before the
printer has received all data for a job it is spooling, the
printer terminates the spooled print job.