QMS 1060, User Manual

Page: 137 / 311

About Gamma
Correction
5-7 Additional Technical Information
A Special Note for QuarkXPress Users
Make sure you have installed the QMS 1060 and 1060E PDFs in the
PDF folder in the QuarkXPress folder. While QuarkXPress 3.3 allows
you to access either a PDF or a PPD, to have access to all of your
printer’s features, you should use the PDF. To select the PDF, go to
the Page Setup dialog box in QuarkXPress, and hold down the Shift
key while clicking the Printer Type list box. (The italicized selections
are PPDs, and the non-italicized selections are PDFs.)
» Note: The 1060E PDF allows you to choose between basic and
enhanced (advanced) screening (or halftoning) in QuarkXPress. If
this PDF is not present, you won’t be able to used enhanced
halftoning even though the printer supports it.
Enhanced Screening
To use enhanced (advanced) screening (or halftoning), do the
following:
At the Printer
n
In the Administration/Emulations/PostScript/Halftone Type menu
select Advanced.
n
In the Administration/Emulations/PostScript/Gamma Correction
menu select No.
In Your QuarkXPress Document (Page Setup Dialog Box)
n
In the Printer Type listbox select 1060 Enhanced Screening PDF.
n
If you have EFIcolor software loaded, select None.
n
Set the Halftone Screen (lpi) to 95.
n
Select Use PDF Screen Values.
n
Ensure that the Halftoning box reads
C 45 lpi 0
M 45 lpi 0
Y 45 lpi 0
K 45 lpi 0