QMS 1060, User Manual

Page: 53 / 311

Copies
4-19 Printer Configuration
Copies
While it is usually preferable to use your application to select the
number of copies of your document you want to print, you can change
the default number of copies for all print jobs through the printer con-
trol panel.
Flash Memory
The system software in your QMS 1060 Print System is stored on
4 MB of flash memory that can be erased and rewritten to “in a flash.”
This allows you to update the system software without opening up the
printer and installing new PROMs. Updated system software allows
you to take advantage of future enhancements to the printer.
Enabling/Disabling New Flash Image
Use the Administration/Miscellaneous/New Flash Image menu to
update the system software (image in flash ROM).
Menu Operator Control/Copies
Choices 001-1000
Default 001
Notes Sets the default number of copies for all subsequent
print jobs. When power is turned off and then back on
again, the number of copies is restored to the default
setting of 001.
Menu Administration/Miscellaneous/New Flash Image
Choices Yes—Download new system code
No—Don’t download new system code
Default No