QMS 1060, User Manual

Page: 121 / 311

Printer Start-Up
Options
4-87 Printer Configuration
Printer Start-Up Options
The Administration/Startup Options menu allows you to configure
your printer to run certain options automatically when you turn it on.
Enabling/Disabling the Start-up Page
By default the printer prints a start-up page when you turn it on. The
start-up page lists basic information about the printer, such as its
name, the PostScript emulation level and version, and various printer
settings. However, you can turn the start-up page off to conserve
paper and toner.
Choices 15—Use lower power after 15 minutes of inactivity.
30—Use lower power after 30 minutes of inactivity.
1 hour—Use lower power after one hour of inactivity.
2 hours—Use lower power after two hours of inactivity.
3 hours—Use lower power after three hours of inactivity.
Off—Use normal power all of the time.
Default 30 minutes
Menu Administration/Startup Options/Do Start Page
Choices Yes—Print a start-up page each time the printer is turned on.
No—Don’t print a start-up page each time the printer is turned
on.
Default Yes
Notes If you used the Administration/Engine/Inputbin x Name
options to change the names of the inputbins, these
names replace Multipurpose, Lower, and Optional in the
message window.