QMS 1060, User Manual

Page: 277 / 311

FCC
Compliance
D-3 Notices
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
1 Reorient or relocate the receiving antenna.
2 Increase the separation between the equipment and the receiver.
3 Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
4 Consult the dealer or an experienced radio/TV technician for
help.
» Note: A shielded cable is required to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules.
▲
Caution
: Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for compliance to
Federal Regulations could void the user's authority to operate this
product within the Laws and Regulations of the Federal
Communications Commission.
M
WARNING!
To prevent electrical shock, do not remove any covers
from your printer unless you are experienced in working with circuit
boards and are following instructions for procedures described in
QMS documentation.
ACHTUNG! Um elektrische Kurtzschlüsse zu vermeiden, entfernen
Sie keine Gehaüseteile von Ihrem Drucker, wenn Sie keine
Erfahrungen im Umgang mit elektrischen Bauteilen haben. Befolgen
Sie die in der QMS Dokumentation beschriebenen Hinweise.