QMS 1060, User Manual

Page: 117 / 311

Printer Engine
Features
4-83 Printer Configuration
Printer Engine Features
Through the Administration/Engine menu you can set five print
engine-related parameters.
Adjusting the Image Alignment
This option adjusts the horizontal and vertical placement of printed
images.
To check image alignment, print a standard status page (use the Sta-
tus Page key on the printer control panel). When the printer is placing
images properly, the alignment angle bar in the lower-left corner of
the status page is 0.5”/12.7 mm from the left and bottom edges of the
page. If the angle bar is off, use the Image Align option to align the
image horizontally and vertically in pixel increments. Movement is in
pixel increments (1/300"/0.08 mm).
» Note: Engine constraints may limit the accuracy of pixel alignment.
Horizontal Offset
Menu Administration/Engine/Image Alignment/Horiz Offset
Choices 000-300 (0.00"-1.00")
Default 100 (0.33"/.84 mm)