QMS 1060, User Manual

Page: 56 / 311

Updating
System
Software
QMS 1060 Print System Reference 4-22
e When the installation is finished, you’re prompted to click
Quit to exit the Installer program.
n
PC
a At the DOS C:\ DIRECTORY prompt, type
x :pkunzip
x :system
↵
where DIRECTORY is the name of the new
directory you created in step 2, and x is the name of the
disk drive in which you inserted Disk 1.
b Follow the prompts. They instruct you to insert the
system software disks in the following order:
n
Last disk (system software disk 2)
n
Disk 1 (system software disk 1)
n
Disk 2 (system software disk 2)
n
UNIX
a Follow the instructions given above for either the
Macintosh or the PC.
b After the system software file has been decompressed
on hard disk of the Macintosh or the PC, upload the
decompressed file to the UNIX system.
5 Download the system software to the printer.
The procedure for downloading system software depends on
whether the print system software is functional (the printer starts
up normally, and
IDLE
displays in the message window) or non-
functional (the printer can’t start up; the message window
remains blank), and which system software file you decom-
pressed in the previous step.
See one of the following sections for instructions:
n
“Downloading System Software to a Functional Printer—
SYSTEMDL.PS”
n
“Downloading System Software to a Functional Printer—
SYSTEM.DL”
n
“Downloading System Software to a Non-Functional Printer”