QMS 1060, User Manual

Page: 174 / 311

About the
Optional Feeder
QMS 1060 Print System Reference 6-8
2 Place up to 50 envelopes in the cassette short edge first with
print-side (stamp-side) up so that the flap side aligns with
the cassette’s left envelope guide.
3 Adjust the envelope guides.
Push in on the envelope guides to adjust the stack. The guides
move in, adjusting the stack in the center of the cassette. Ensure
that the envelope stack lies flat, lightly touches the guides (is not
buckled), and is positioned under the retaining clips on the
guides.
4 Slide the envelope cassette back into the feeder as far as it
will go.
Retaining Clips