QMS 1060, User Manual

Page: 173 / 311

About the
Optional Feeder
6-7 Printer Options
4 Reconnect the interface cables, plug in the power cord, and
turn the printer back on.
If you experience problems, check the order of the paper feeders
in the stack, making sure that the optional paper feeder’s connec-
tor is correctly aligned with the pins on top of the standard paper
feeder.
Loading the Optional Media Cassette
Follow the directions in the “Loading the 500-Sheet Cassette” section
in chapter 2, “Consumables,” of the
Operation guide.
Loading the Optional Envelope Cassette
With the optional envelope cassette, that is available for purchase
from your QMS vendor, you can print up to 50 envelopes. This feeder
lets you print mailing addresses on envelopes preprinted with logos
or addresses. It even lets you print your own logo and return address
along with the mailing addresses. Envelopes must meet the specifica-
tions listed in appendix B, “Technical Specifications.” See appendix A,
“QMS Customer Support,” for information on QMS vendors.
Load the envelopes in the cassette as follows:
▲
Caution : Do not use envelopes with clasps, snaps, transparent
windows, end-flaps, three or more layers on the left and right edges,
coated linings, self-stick adhesives (peel and seal), or other synthetic
materials. These type envelopes could damage your printer.
» Note: Before you load envelopes in the cassette, make sure that they
are not stuck together, and that the leading edge (edge that feeds in
the printer) is thin and well creased. You might try running a pen
along the leading short-edge to flatten the stack before you insert it in
the cassette.
1 Slide the cassette out of the printer, if one is installed.
The envelope cassette is installed in place of a standard or an
optional cassette in either of the media feeders.