26.11.2017
Installation Guide
Ultimaker 2+ and 3, Magnetic Base Plate
Page 1: ...26 11 2017 Installation Guide Ultimaker 2 and 3 Magnetic Base Plate...
Page 2: ...he installation process please let us know Total install time is 5 10 mins You will need the following to complete the installation process M2x5 screws included Thin Phillips screwdriver Pliers or wre...
Page 3: ...iers remove the screws holding the back two clips on Set the screws and nuts aside for later Step 5 Attach the Magnetic Base to the stock bed heater using the included M2 5 Screws The mounting holes i...
Page 4: ...Tighten finger tight with the thumb nuts and Phillips screwdriver Step 7 Attach the GeckoTek Build Plate to the Magnetic Base and center it Then follow the manufacturer s recommended bed leveling pro...
