QMS 1060, User Manual

Page: 55 / 311

Updating
System
Software
4-21 Printer Configuration
Installing the System Software
Once you have identified the appropriate print system software disk
set (using the table in the previous section), you must install the soft-
ware on your computer’s hard disk before you can download it to the
printer.
1 Ensure that your computer has enough free hard disk space
for the system software.
2 Create a new folder (Macintosh) or directory (PC) on your
computer.
3 Insert Disk 1 of the appropriate print system software disk
set in your computer’s disk drive.
4 Install the files on your computer’s hard disk.
n
Macintosh
a Open the Installer application.
n
If you’re using the SYSTEMDL.PS file (see the
table in the previous section), double-click the
PRINTSYSTEM.INSTALLER file icon.
n
If you’re using the SYSTEM.DL file (see the table
in the previous section), double-click the SYSTEM-
LOADER.1 icon.
b In the dialog box that appears, change the Install
Location to the folder you created in step 2. Use the drop-
down list box to select Select Folder, in the Select the
Installation Folder dialog box select the appropriate disk
and folder, and then click Select.
c Click Install to begin the installation.
d When prompted, insert disk 2 of the system software.
The installation takes approximately 1.5 minutes. The
Installer places the appropriate system software file
(either SYSTEMDL.PS or SYSTEMLOADER) in the
folder you selected in step b.