QMS 1060, User Manual

Page: 273 / 311

Updated PCL 5
DOCs
C-21 Document Option Commands
Set Lines Per Page Command
Set Point Size Command
v
Syntax %%IncludeFeature:linesperpage (#)
Purpose Sets the default PCL line spacing.
Notes Both the %%IncludeFeature:linesperinch and
%%IncludeFeature:linesperpage DOC commands
affect PCL’s default VMI (vertical motion index). In the
event that both are specified, the linesperpage DOC
command is ignored.
Variable #
Purpose Specifies the number of lines on the default
page at the default orientation.
Range 1-3000
Default Printer configuration dependent
Format Integer
Syntax %%IncludeFeature:pointsize (default font size)
Purpose Specifies the point size for scalable default font
Notes If the selected font is not scalable or if a bitmap font size is
specified, this setting is ignored.
Variable default font size
Purpose Specifies the floating point number for point size.
Range 0.25 to 999.75 in 0.25 increments
Default Printer configuration dependent
Format Floating point number