QMS 1060, User Manual

Page: 220 / 311

Storage
Options
QMS 1060 Print System Reference 6-54
External SCSI Hard Disks
For information on installing your external hard disk, see the docu-
mentation that comes with your hard disk.
Hard disk specifications are included in Q-FAX document 6502,
“QMS-tested SIMMs and Hard Disks.” See appendix A, “QMS Cus-
tomer Support,” of this manual for information on accessing Q-FAX
documents.
Identifying Hard Disks
The hard disks are identified by their device numbers. If an optional
internal hard disk is attached it has a device number of DSK7. If
optional external hard disks are attached to the printer, their device
numbers can range from DSK0 to DSK6. Device numbers of external
disks can be set on the back of the hard disk by the installer.
3 If you are installing another hard disk, go to the “Installing an
Internal IDE Hard Disk” procedure, earlier in this chapter.
If you are not installing another hard disk, return to step “Attach the
IDE-SCSI board.” on page 45 of the “Installing an IDE-SCSI Board”
procedure, earlier in this chapter.
Pin # 1
Ribbon
Cable
Cable
Connector
IDE-SCSI Board Connector
Pin # 1
Ribbon
Cable
IDE Hard Disk Connector