QMS 1060, User Manual

Page: 73 / 311

Emulations
4-39 Printer Configuration
» Note: To scale plots, select the paper size originally used for the plot
in the Paper Type menu and then enter the reduction or enlargement
needed to fit the plot on the new page in the Scaling Percent menu. If
necessary, enter new x,y coordinates in the Origin menu to reposition
the plot on the page.
Setting HP PCL5 Parameters
The PCL 5 menu maintains PCL 5 emulation attributes such as
default font, symbol set, and point size. There are ten configuration
settings. See appendix E, “Manual Updates,” for updated information
on the PCL 5 emulation DOC commands.
Default Font
Sets the printer’s default font.
Menu Administration/Emulations/PCL 5/Default Font
Choices Courier12, Courier12bold, Courier12italic, Courier10,
Courier10bold, Courier10italic, Lineprinter, Times*,
Times*italic, Times*bold, Times*blditalic, Univ*,
Univ*italic, Univ*bold, Univ*blditalic, Unicond*,
Unicond*italic, Unicond*bold, Unicond*blditlc, Select by
index,
Default Courier12
Notes Fonts with an asterisk “*” in their names are scalable.
Their default point size is set by the Point Size X100
option. Choosing Selectbyindex as the default font
selects the font by the index that is set through the
Default Font Index option.
All courier fonts (courier10 and courier12) and lineprinter
are bitmap fonts, so they have a fixed point size.
Selecting a bound, bitmap font overrides the default
settings for symbol set and point size. An unbound font
uses the specified default symbol set if possible, and a
scalable font uses the default font size.