QMS 1060, User Manual

Page: 268 / 311

Updated PCL 5
DOCs
QMS 1060 Print System Reference C-16
Select Font Command
Select Font Index Command
Syntax %%IncludeFeature:font ( font name)
Purpose Specifies the default font to use.
Notes Fonts are identified by the names shown above. Only the
resident fonts may be selected (the available set varies
from printer to printer). An asterisk “*” in the name
indicates that a font is scalable, and that a point size is to
be applied. The value selectbyid indicates that the default
font ID or unique font index will be used for default font
selection. Selecting a bound, bitmap font overrides the
default settings for symbol set and point size. An unbound
font uses the specified default symbol set if possible, while
a scalable font uses the default font size.
Variable font name
Purpose Specifies the default font name.
Range courier12 times*blditalic
courier12bold univ*
courier12italic univ*italic
courier10 univ*bold
courier10bold univ*blditalic
courier10italic univcond*
lineprinter univcond*italic
times* univcond*bold
times*italic univcond*blditlc
times*bold selectbyindex
Default Depends on printer configuration
Format Character
Syntax %%IncludeFeature:fontid (index #)
Purpose Specifies the default font index number.