QMS 1060, User Manual

Page: 122 / 311

Special Pages
QMS 1060 Print System Reference 4-88
Enabling/Disabling the SYS\START File
If you have a hard disk and Do Sys Start is enabled, when the printer
is turned on, the controller checks the hard disk for a PostScript file
named SYS\START and executes this file. This file does not print.
Information on creating a SYS\START file is available via Q-FAX.
Loading the PostScript Error Handler
You have the option of loading Error Handler, a diagnostic tool that
allows you to identify PostScript errors encountered during a print job.
Refer to the
PostScript Language Reference Manual (Adobe Sys-
tems Incorporated, Reading, PA: Addison-Wesley, 1990, ISBN 0-201-
18127-4) for more information on PostScript errors.
Special Pages
Use the Administration/Special Pages menu to print special pages,
such as status pages, header pages, and trailer pages. See the
QMS
Crown Document Option Commands manual, available for purchase
from your QMS vendor, for detailed information on the contents of
these special pages.
Menu Administration/Startup Options/Do Sys Start
Choices Yes—Check the hard disk for and execute the SYS\START file
when the printer is turned on.
No—Don’t check the hard disk for a SYS\START file.
Default Yes
Menu Administration/Startup Options/Do Error Handler
Choices Yes—Load the Error Handler.
No—Don’t load the Error Handler.
Default No
Note The printer must be restarted for changes to the Mode
menu to take effect.