QMS 1060, User Manual

Page: 94 / 311

Interfaces
QMS 1060 Print System Reference 4-60
Def Job Prio
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. In other words, you can give jobs received via the
parallel interface priority over jobs received via the LocalTalk and
serial interfaces.
PS Protocol
Sets the binary communications protocol (BCP) for communicating
over a parallel interface to a PostScript printer. See chapter 5, “Addi-
tional Technical Information,” for a full discussion of PS Protocol.
Menu Administration/Communications/Parallel/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)
Menu Administration/Communications/Parallel/PS Protocol
Choices Normal—Enable standard, ASCII hex protocol. Data is
sent and received in ASCII format. This mode is
recommended if you do not print binary data. It was
designed for data in the printable ASCII range. Print jobs
can alter the PS protocol value through PostScript
operators.
Normal Fixed—Enable standard, ASCII hex protocol.
Print jobs cannot alter this value through PostScript
operators.
Binary—Enable binary communications protocol. Print
jobs can alter this value through PostScript operators.
Data in the printable ASCII range also print.
Binary Fixed—Enable binary communications protocol.
Print jobs cannot alter this value through PostScript
operators. Data in the printable ASCII range also prints.
Default Normal