Interfaces
4-63
Printer Configuration
End Job Mode
Enables (and identifies an end-of-job sequence) or disables data
stream sensing for the end-of-document (EOD) command. See chap-
ter 5, “Additional Technical Information,” for details on how to imple-
ment this feature on your QMS 1060 Print System.
Def Job Prio
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. In other words, you can give jobs received via the
serial interface priority over jobs received via the LocalTalk and paral-
lel interfaces.
Menu
Administration/Communications/Serial/End Job Mode
Choices
None—The printer recognizes only the PostScript ^D
command.
QMS EOD—The printer recognizes only the QMS
%%EndOfDocument command.
HP EOD—The printer recognizes only the HP
<ESC>%12345X) command.
Default
None
Notes
If your host uses hardware flow control, set this option to
match the type used by your host.
Menu
Administration/Communications/Serial/Def Job Prio
Choices
001-100 (highest-lowest priority)
Default
001 (highest priority)
Summary of Contents for 1060
