QMS 1060, User Manual

Page: 95 / 311

Interfaces
4-61 Printer Configuration
Setting Serial Interface Parameters
Use the Administration/Communications/Serial menu to set the serial
interface communication values used for printer-host communica-
tions. Fifteen options are available.
Mode
Enables or disables the PostScript interactive mode from the host.
Emulation
Sets the serial interface emulation.
Menu Administration/Communications/Serial/Mode
Choices Interactive—Establish two-way communication between the
host and the printer.
Noninteractive—Establish one-way communication from the
host to the printer.
Disabled—Turn off serial communication with the host. The
printer stops accepting print jobs over the serial interface.
Default Interactive
Notes If you are not using the serial interface, you may select
Disabled to prevent any jobs from being received
through that interface.
The printer must be restarted for changes to the Mode
menu to take effect. Changing the Mode setting will
cause the
REBOOT NOW?
prompt to appear. Your can
either choose to restart the printer now and this change
takes effect immediately or you can manually restart the
printer and have this change take effect later.
Menu Administration/Communications/Serial/Emulation
Choices ESP, Hexdump, HPGL, PCL5, PostScript, Lineprinter.
Other optional emulations also appear, if installed.