QMS 1060, User Manual

Page: 163 / 311

PS Protocol
Option
5-33 Additional Technical Information
Options
The following options are available in the PS Protocol menu. The
default setting for all interfaces is Normal.
Menu Administration/Communications/ Interface/PS Protocol
Choices Name and Description
Normal—Enables standard, ASCII hex
protocol. Data is sent and received
in ASCII format. This mode is
recommended if you do not print
binary data. It was designed for data
in the printable ASCII range. Print
jobs can alter the PS protocol value
through PostScript operators.)
Interfaces
LocalTalk,
Parallel,
Serial,
Ethernet,
Token-Ring
Normal Fixed—Enables standard, ASCII
hex protocol. Print jobs cannot alter this
value through PostScript operators.)
LocalTalk,
Parallel,
Serial,
Ethernet,
Token-Ring
Binary—Enables binary
communications protocol. Print jobs
can alter this value through
PostScript operators. Data in the
printable ASCII range also prints)
LocalTalk,
Parallel,
Serial,
Ethernet,
Token-Ring
Binary Fixed—Enables binary
communications protocol. Print jobs
can not alter this value through
PostScript operators. Data in the
printable ASCII range also prints.)
LocalTalk,
Parallel,
Serial,
Ethernet,
Token-Ring