QMS 1060, User Manual

Page: 205 / 311

Optional
Network
Interfaces
6-39 Printer Options
Optional Network Interface Assembly Kit
The optional network interface assembly kit includes the following:
n
A network interface card
n
Network interface documentation
The kit may also include additional parts not required for network
interface installation on this printer.
Installing an Optional Network Interface
M
WARNING!
Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG!
Bitte schalten Sie den Drucker aus und ziehen Sie den
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
▲
Caution : It's very important to protect the printer controller board
from electrostatic damage while performing this task.
If an anti-static wrist strap is provided in your printer option kit,
attach one end of it to your wrist and the other end to any convenient
electrical ground (for example, the bare metal chassis of equipment,
as on the back of a computer, that is plugged in but
turned off).
Never attach the wrist strap to any piece of equipment with an
electrical current present. Turn off all power switches first. Plastic,
rubber, wood, painted metal surfaces, and telephones are not
acceptable grounding points. The printer isn't an acceptable
grounding point either because it must be unplugged before you
perform this task.
If you don't have an anti-static wrist strap, discharge your body's
static electric charge by touching a grounded surface before you
handle any printer boards or components and before removing the
controller board cover. Also avoid walking around after grounding
yourself.