QMS 1060, User Manual

Page: 69 / 311

Emulations
4-35 Printer Configuration
Emulations
Use the Administration/Emulations menu to set the parameters for
the available printer emulations. Optional printing emulations appear
only if installed.
» Note: To choose an emulation or ESP for a particular interface, use
the appropriate interface menu in the Administration/Communications
menu. See “Interfaces,” later in this chapter, for more information.
Setting ESP Default Parameters
The ESP Default Emul sets the ESP default emulation used when
ESP is unable to identify the language of a print job. This allows the
system administrator to select alternate default emulations.
Setting HP-GL Parameters
Fifteen configuration choices are available under Emulations/HP-GL.
Enhanced Mode
Increases the resolution of the grid for downloaded characters. The
GL UC (User-defined Character) command allows you to download
and draw characters using an encoding scheme consisting of
sequences of pen control movements and coordinate sequences.
The characters are drawn on a grid that is superimposed on the char-
acter plot cell.
Menu Administration/Emulations/ESP Default
Choices HPGL, Lineprinter, PCL5, PostScript
Default PCL5
Menu Administration/Emulations/HPGL/Enhanced Mode