QMS 1060, User Manual

Page: 91 / 311

Interfaces
4-57 Printer Configuration
EPP (enhanced parallel port), and nibble. See chapter 5, “Additional
Technical Information,” for a discussion of the different modes.
Emulation
Sets the parallel interface’s default emulation.
Min K Spool
Sets the minimum number of kilobytes of system memory allocated to
the parallel interface.
Menu Administration/Communications/Parallel/Mode
Choices Interactive—Establish bidirectional (IEEE 1284)
communication between the host and the printer.
Noninteractive—Establish unidirectional (IEEE 488)
communication from the host to the printer.
Disabled—Turn off parallel communication with the host. The
printer stops accepting print jobs over the parallel interface.
Default Noninteractive
Notes The printer must be restarted for changes to the Mode
menu to take effect. Changing the Mode setting will
cause the
REBOOT NOW?
prompt to appear. Your can
either choose to restart the printer now and this change
takes effect immediately or you can manually restart the
printer and have this change take effect later.
Menu Administration/Communications/Parallel/Emulation
Choices ESP, Hexdump, HPGL, PCL5, PostScript, Lineprinter
Other optional emulations also appear, if installed.
Default ESP
Menu Administration/Communications/Parallel/Min K Spool
Choices 00000-99999