QMS 1060, User Manual

Page: 125 / 311

Special Pages
4-91 Printer Configuration
n
If your printer has an optional hard disk, and if Administration/
Memory/Enable Disk Swap is set to On, then any extra memory is
distributed to all memory clients.
» Note: If an Intellifont ROM is installed on a QMS 1060 Print
System with a hard disk installed and with Administration/
Memory/Enable Disk Swap set to On, then the following appears
in the Hard Disk Status section of the status page:
%cartridge1%
%cartridge%
Working with Header Pages
A header page is a separator page that prints before a print job to
help users sort out their jobs. The information on the header page can
be customized. See the
QMS Crown Document Option Commands
manual for more information.
Enabling/Disabling Header Pages
Identifying a Header Page Input Source
You can select the inputbin (tray or cassette) from which the printer
pulls media when printing the header page.
Menu Administration/Special Pages/Header Page
Choices On—Print a header page before each job.
Off—Don’t print a header page before each job.
Default Off
Menu Administration/Special Pages/Header Inputbin
Choices Multipurpose—Pull header page media from the multipurpose
tray.
Lower—Pull header page media from the 500-sheet paper
cassette.
Optional—Pull header page media from the optional paper
cassette.