QMS 1060, User Manual

Page: 190 / 311

Kanji Option
Kit
QMS 1060 Print System Reference 6-24
Accessing the Fonts
Using Your PCL Application
Use your PCL application to set the font for a single document. See
your application documentation for information.
Using the Printer Configuration Menu
Use the printer configuration menu to set the default font for all PCL
documents.
» Note:
Before beginning this procedure, you must have a PCL 5 font
list from the advanced status page. See steps 4 and 5 of the “Verify
the Installation” section, above, for information on printing an
advanced status page.
1 Access the Administation/PCL5/Default Font menu.
2 Choose the Select by Index option.
3 Access the Administration/PCL5/Default Font Idx menu.
4 Identify the appropriate font selection index.
The font selection indexes are listed in the PCL 5 font list on the
advanced status page.
5 Save your changes and put the printer back on line.
Kanji Option Kit
The following steps are involved in setting up and using the Kanji
fonts:
1 Installing IDE-SCSI board and IDE hard disk.
2 Configuring the printer for Kanji.
3 Accessing the Kanji fonts.
This kit contains a preformatted internal IDE hard disk with the Kanji
fonts installed.