QMS 1060, User Manual

Page: 214 / 311

Storage
Options
QMS 1060 Print System Reference 6-48
Removing an IDE-SCSI Board
Use the following procedure if you need to remove an already-
installed IDE-SCSI board.
» Note:
You need a Phillips screwdriver for this procedure.
M
WARNING! Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG! Bitte schalten Sie den Drucker aus und ziehen Sie den
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
▲
Caution: It's very important to protect the printer controller board from
electrostatic damage while performing this task.
If an anti-static wrist strap is provided in your printer option kit,
attach one end of it to your wrist and the other end to any convenient
electrical ground (for example, the bare metal chassis of equipment,
as on the back of a computer, that is plugged in but
turned off). Never
attach the wrist strap to any piece of equipment with an electrical
current present. Turn off all power switches first. Plastic, rubber, wood,
painted metal surfaces, and telephones are not acceptable grounding
points. The printer isn't an acceptable grounding point either because
it must be unplugged before you perform this task.
If you don't have an anti-static wrist strap, discharge your body's
static electric charge by touching a grounded surface before you
handle any printer boards or components and before removing the
controller board cover. Also avoid walking around after grounding
yourself.