QMS 1060, User Manual

Page: 177 / 311

Reinstalling the
Controller
Board
6-11 Printer Options
2 Remove and set aside the two screws, one on each end of
the metal mounting bracket cover on the rear of the printer.
3 Remove the controller board.
a Using both hands, slide the controller board out of the printer
and set it aside.
Reinstalling the Controller
Board
The controller board must be reinstalled after installing a SIMM up-
grade, optional Intellifont PROMs, an optional hard disk, the Kanji
Option Kit, or an optional network.
M
WARNING! The following options which require access to the
controller board—SIMM upgrades, optional network interfaces, and
optional hard disks—should be performed only by a qualified QMS
service technician.
ACHTUNG! Arbeiten am QMS Controller (Speichererweiterung,
Netzwerkschnittstelle und interne Festplatte) sollten nur von
qualifiziertem Servicepersonal durchgeführt werden.