QMS 1060, User Manual

Page: 128 / 311

Timeouts
QMS 1060 Print System Reference 4-94
Setting an ESP Timeout
The ESP timeout is the maximum number of seconds the printer uses
to match an emulation before printing the job in the default emulation.
Setting a PostScript Emulation Timeout
The PostScript emulation timeout is the maximum number of seconds
the PostScript emulation waits for incoming data.
Setting a Print Job Timeout
The print job timeout is the maximum number of seconds the printer
processes a print job before it ends the job.
Menu Administration/Communications/Timeouts/ESP Timeout
Choices 00000-99999
Default 00003 (3 sec.)
Notes A value of 000 is the same as infinity, no timeout.
Menu Administration/Communications/Timeouts/PS Wait
Timeout
Choices 00000-99999
Default 00030 (30 sec.)
Notes A value of 000 is the same as infinity, no timeout.
If the printer goes idle after 30 seconds and does not
print, increase this timeout. Large print jobs, such as
those generated by graphics or computer-aided design
applications, require that this number be increased to
00300 (5 min.).
Menu Administration/Communications/Timeouts/Job Timeout
Choices 00000-99999
Default 00000 (infinity, no timeout)
Notes A value of 000 is the same as infinity, no timeout.