QMS 1060, User Manual

Page: 92 / 311

Interfaces
QMS 1060 Print System Reference 4-58
Spool Timeout
Sets the number of seconds the interface waits for data from the host
before terminating a spooled print job.
Data Bits
Sets the number of data bits transmitted per character in the data
stream from the host.
Default 00015
Notes This value must be less than K Mem For Spool
(Administration /Memory menu).
A 00000 value does not turn off the spooling buffer for
the parallel interface. If the value is set to 00000, the
printer calculates the Min K Spool automatically at
initialization.
The printer is immediately restarted when a change is
made to this option. (For example, change the value to
35, press the Select key, and the menu changes to
LocalTalk. Press the Online/Offline key and the printer
automatically reboots.
Menu Administration/Communications/Parallel/Spool Timeout
Choices 00000-99999
Default 00030
Notes If the spool timeout value expires before the printer has
received all data for a job it is spooling, the printer
terminates the spooled print job.
Menu Administration/Communications/Parallel/Data Bits
Choices 7 Bits, 8 Bits
Default 8 Bits
Notes Set this value to match the number of data bits
transmitted by your host.