QMS 1060, User Manual

Page: 63 / 311

Updating
System
Software
4-29 Printer Configuration
access the QMS Main Library through the L (Library of Files)
selection, do the following:
a Choose D (Download a File).
b Type
hibaud.exe
↵
c Exit from the Bulletin Board.
d Terminate the connection.
3 Type
hibaud
↵
to extract the ModeX files.
4 Set the PC’s baud rate to 38400 by typing
modex.exe
↵
modex # 38400 n 8 1
↵
where # is 1-4. See the MODEX.DOC file for more information on
this program.
5 Turn on the printer, wait for
IDLE
to appear in the message
window, and then print an advanced status page.
This procedure should not change the current configuration set-
tings. However, the advanced status page provides a record of all
current configuration settings, so you can verify that they are the
same after the system software has been updated.
6 Take the printer off line.
7 Turn on the RTS and CTS hardware flow control settings.
a Access the Administration/Communications/Serial/Hdwe
Flow Ctl menu.
b Set RTS to On.
c Set CTS to On.
d Press the Online/Offline key to be prompted to save your
changes.
e Select Yes to Save Changes.
8 Access the Administration/Miscellaneous/New Flash Image
menu.